Graham Field 765000 Camping Equipment User Manual


  Open as PDF
of 24
 
765000-INS-LAB-RevB10 11
Maxfirm button:
The pump will automatically enter
maxrmmodeeverytimethepoweristurnedon.Maxrm
mode ensures the pump is able to reach its maximum oper-
atingpressure.Maxrmmodewilllastfor20minutes,and
then the system will automatically enter auto-adjust mode.
Todisablemaxrmmode,pressthemaxrmbutton.When
enabled,themaxrmindicator,atleftofbutton,illuminates.
Front panel, third row
Panel lock button:Thepanellockbuttonsetsthe
panellocktoprotectthepanelsettingsfromaccidental
change.Pressfortwosecondstolock;pressFIRMLYfor
twosecondstounlock.Afterthepanelhasbeenuntouched
forveminutes,thepanellocklocksautomatically.When
thepanelislocked,thepanellockindicatorwillilluminate.
Power (ON/OFF) button: The power button turns
powertothemattresssystemONorOFF.PresstoturnON;
presstoturnOFF.Whenpowerison,thepower(ON/OFF)
indicatorwillilluminate.WhenpoweristurnedOFF,the
mattress system will slowly deate.
Note: Main power switch on side of pump, previously shown
in PUMP: REAR, must be ON in order for the front panel
power button to function.
Alarm Mute button: The alarm mute button temporar-
ilysuspendstheLEDindicatorandbuzzerwheneither
the low-pressure alarm or power failure alarm is activated.
Shouldtheproblemnotberesolvedwithinthreeminutes,
the alarm will resume.
 previous next