Filter
Top Products
9
7. Have a second person hold the console assem-
bly near the Right Upright (78).
Connect the wire harness on the console as-
sembly to the Upright Wire (74) as shown in the
inset drawing. The connectors should slide to-
gether easily and snap into place. If they do
not, turn one connector and try again. IF THE
CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
Remove the wire tie from the Upright Wire (74).
Console Assembly
78
7
74
Wire
Tie
6
. See the left inset drawing. Identify the outer
side of the remaining Frame Spacer (79).
Hold the Frame Spacer (79) between the Left
Upright (77) and the Lift Frame (65), with the
outer side of the Frame Spacer facing the
L
eft Upright. Attach the Left Upright to the Lift
Frame with a 3/8" x 2 1/2" Bolt (1), a 3/8"
Washer (10), and a 3/8" Nut (13); do not
tighten the Bolt yet.
6
77
1
1
79
7
9
10
13
13
65
10
65
Outer
Side
Inner
Side
79
77
74
Wire
Harness