Filter
Top Products
6
ASSEMBLY
To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly re-
q
uires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of
the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated
with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt
or to the shipping carton. This is normal and does not affect treadmill performance. If there is lubricant on top of
t
he walking belt, simply wipe it off with a soft cloth and mild, non-abrasive cleaner.
Assembly requires the included hex keys and your own Phillips screwdriver , rubber
mallet , adjustable wrench , wire cutters , and needlenose pliers .
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached
to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem-
bly. Extra hardware may be included.
3/8" x 2 1/2" Bolt (1)–2
3/8" x 2 1/4" Bolt (8)–6
#8 x 3/4"
Screw (7)–6
1/4" Nut (4)–4
5/16" Star
Washer (5)–4
1/4" x 1/2"
Bolt (6)–4
3/8" Star
Washer (9)–4
3/8" Washer
(10)–2
1/4" Star
Washer (11)–6
#8 x 1/2" Screw
(12)–1
3/8" Nut (13)–4
1/4" Washer
(31)–2
Wheel Spacer
(83)–4
5/16" x 3/4"
Bolt (2)–4
1/4" x 1 1/2" Bolt (3)–6