Filter
Top Products
22
THE INFORMATION MODE
The console features an information mode that keeps
t
rack of the total distance that the walking belt has
moved and the total number of hours that the treadmill
h
as been used. The information mode also allows you
to select miles or kilometers to measure distance, and
to turn on and turn off the display demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The Time display will show
the total number of hours the
treadmill has been used.
The Distance display will
show the total number of
miles or kilometers that the
walking belt has moved.
Press the Stop button again to veiw the following infor-
mation.
An “E” for English miles or an
“M” for metric kilometers will
appear in the Incline/Pulse
display. Press the Speed in-
crease button to change the
unit of measurement if de-
sired.
The console features a dis-
play demo mode, designed to
be used if the treadmill is dis-
played in a store. While the
demo mode is turned on, the
console will function normally
when you plug in the power cord, switch the reset/off
circuit breaker to the reset position, and insert the key
into the console. However, when you remove the key,
the displays will remain lit, although the buttons will not
function. If the demo mode is turned on, a “d” will ap-
pear in the Calorie/Speed display while the information
mode is selected. To turn on or turn off the demo mode,
press the Speed decrease button.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
s
tereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
s
ole through the audio jack above the speakers.
To use the audio jack, locate the audio wire and plug it
into the audio jack on the right side of the console.
Then plug the audio wire into a jack on your MP3
player, CD player, or other personal audio player.
Make sure that the audio wire is fully plugged in.
Next, press the Play button on your MP3 player, CD
player, or other personal audio player. Adjust the vol-
ume on your personal audio player or press the
Volume increase and decrease buttons on the con-
sole.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face and not on the console.