Filter
Top Products
11
11. With the help of a second person, hold the con-
sole assembly near the Uprights (77).
C
onnect the Upright Wire (76) to the console
wire extending from the console assembly. See
t
he inset drawing. The connectors should
slide together easily and snap into place. If
they do not, turn one connector and try again. IF
THE CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
Remove the wire tie from the Upright Wire (76).
Insert the excess wire into the right Upright (77)
as you set the console assembly on the
Uprights. Be careful not to pinch any wires.
Console
Assembly
1
1
77
Wire
Tie
Console
Wire
76
76
Console
Wire
77
12. Attach the console assembly to the Uprights
(77) with four 3/8" x 1 1/4" Patch Bolts (9) and
four 3/8" Star Washers (11). Start all four
Patch Bolts before tightening any of them.
Console
Assembly
12
77
11
11
9
9
11
9
9
77
11