Filter
Top Products
10
9. Press the Left Handrail Cover (95) up against
the console assembly. See the inset drawing.
Align the lip on the Left Handrail Cover with the
l
ip on the console assembly. Leave a small gap
between the Left Handrail Cover and the con-
s
ole assembly. Make sure no wires are
pinched. Then tighten the four #8 x 1/2" Screws
(2) in the Left Handrail (94). Note: The Screws
are preattached.
Attach the Right Handrail Cover (103) to the
console assembly in the same way.
Tighten two 1/4" x 1/2" Bolts (3) into the
Handrails (94, 102) and the console assembly.
9
Console
Assembly
3
3
95
1
03
2
2
2
2
Lips
94
102
10. Identify the Left Accessory Tray (113) and the
Right Accessory Tray (114). Attach the Left
Accessory Tray and the Right Accessory Tray
to the console assembly with eight #8 x 1/2"
Screws (2).
2
10
2
Console
Assembly
114
113