Filter
Top Products
22
40. Attach the Leg Lever Cable (51) to the Upright (2)
with the M10 x 120mm Bolt (115), an M10
Washer (80), a 7mm Spacer (111), and an M10
Nylon Locknut (77). Make sure that the flat
edge of the Cable is against the Spacer.
41. Attach the Right Butterfly Pad (35) to the Right
Butterfly Arm (26) with two M6 x 65mm Button
Screws (91) and two M6 Washers (114).
Repeat this step for the Left Butterfly Pad (34).
42. Attach the Backrest (31) to the Backrest Frame
(7) with two M6 x 20mm Screws (88), an M6 x
38mm Screw (89), and an M6 Washer (114).
Insert the Backrest Frame (7) into the Upright (2)
and tighten the Backrest Adjustment Knob (53)
into the Upright. Make sure that the Adjustment
Knob passes through one of the holes in the
Backrest Frame.
40
41
26
35
34
114
91
2
115
51
77
80
111
42
114
89
53
2
7
88
31
Seat Assembly
Flat Edge