Filter
Top Products
21
37. Wrap the Leg Lever Cable (51) under a 90mm
Pulley (48). Attach the Pulley to the Right Press
Arm (16) with an M10 x 50mm Bolt (97), two Half
Guards (55), a Cable Trap (56), an M10 Washer
(80), and an M10 Nylon Locknut (77). Make sure
that the Cable Trap and Half Guards are ori-
ented as shown.
38. Wrap the Leg Lever Cable (51) around a “V”-pul-
ley (47). Attach the Pulley to the Upright (2) with
an M10 x 70mm Bolt (113), two Half Guards (55),
an M10 Washer (80), a Long Cable Trap (57),
and an M10 Nylon Locknut (77). Make sure that
the Cable Trap and Half Guards are oriented
as shown.
39. Wrap the Leg Lever Cable (51) around a 90mm
Pulley (48). Attach the Pulley to the Left Press
Arm (15) with an M10 x 50mm Bolt (97), two Half
Guards (55), an M10 Washer (80), and a Cable
Trap (56). Make sure that the Cable Trap and
Half Guards are oriented as shown.
37
38
47
80
55
77
2
55
51
113
57
97
55
56
48
77
80
55
16
51
39
55
56
55
77
15
48
51
80
97