Filter
Top Products
Pag. 16.
Step 3. Place the battery in a stable position, in such a way that the energy indicator is
visible.
Step 4. Remove the cap from the battery’s charging socket, which is located at the
bottom of the battery.
Step 5. Put the charger plug into the
battery’s charging socket with the
arrow mark UP.
Step 6. Connect the power source plug into an electric point (AC 220~230 volts) and
make sure that all poles are fully inserted into the socket.
Keep the area where the battery is charged well ventilated and free from litter or
anything else combustible to avoid fire from sparks or overheating.
Step 7. The lamp located on the charger will illuminate RED,
indicating that electricity is flowing into the battery.
First, the lamp blinks RED for a few seconds.
PUSH THE “REFRESH” BUTTON ON THE
CHARGER.
The LED of the charger will start illuminating steady
GREEN light, indicating that the batteries are being
discharged / refreshed.
Step 8. The light turns from GREEN into RED, indicating that refreshing has completed and the battery
will be recharged.
Step 9. When the RED light turns from steady burning into blinking slowly, the battery has reached its full
capacity.
Arrow mark