Filter
Top Products
Pag. 14.
Step 3. Place the battery in a stable position, in such a way that the energy indicator is
visible.
Step 4. Remove the cap from the battery’s charging socket, which is located at the
bottom of the battery.
Step 5. Put the charger plug into the
battery’s charging socket with the
arrow mark UP.
Step 6. Connect the power source plug into an electric point (AC 220~230 volts) and
make sure that all poles are fully inserted into the socket.
Keep the area where the battery is charged well ventilated and free from litter or
anything else combustible to avoid fire from sparks or overheating.
Step 7.
DO NOT PUSH THE “REFRESH” BUTTON ON THE
CHARGER.|
For “REFRESH-charging” see section 5.1.3 (below).
The lamp located on the charger will illuminate RED,
indicating that electricity is flowing into the battery.
• First, the lamp blinks RED for a few seconds, then
it gives steady RED light when charging and
• blinks slowly after approx. 4~5 hours (in case of
full charge), indicating that the battery has reached
full capacity and charging has completed.
Normal charging:
LIGHT ON CHARGER HOW LONG DOES IT TAKE ? WHAT’S HAPPENING ?
1.
RED light blinks
0.9 sec “on” / 0.1 sec “off”
Just a few moments
Charging will start soon
(“waiting”)
2. RED light burns 4~5 hours max. Charging
3.
RED light blinks slowly
2 sec “on” / 2 sec “off”
Until the power source plug is
disconnected
Charging completed !
(“completion”)
Arrow mark