Filter
Top Products
10.1 The ACL button
King Arthur may occasionally “freeze up” or refuse to function
properly because of static electric discharge. If this happens, press the
ALL CLEAR (ACL) button.
To do this, turn King Arthur upside-down so the battery compart-
ment is on the upper right. The
ALL CLEAR button is recessed. You'll
see a "dimple" toward the bottom right. It has a small hole in it.
Gently push a ballpoint pen or a straightened paper clip into the hole
and then release. You'll again hear King Arthur's ready tones.
SPECIAL NOTE: After you push the ACL button, King Arthur will have forgot-
ten any game positions that may have been in his memory.
10.2 Special Care
Avoid rough handling such as bumping or dropping.
Avoid moisture and extreme temperatures. Store away from windows
and other direct sources of heat and cold, such as heating, air vents or
direct sunlight. For best results, use between the temperatures of 39º
and 100º Fahrenheit (4º and 38º Celsius).
Clean using only a slightly damp cloth. Do not use cleaners with
chemical agents.
37
ENGLISH
appears in the right color on
your display.
Follow this procedure until all
the pieces in the problem or
position are completely set up.
Make sure that King Arthur
knows which color is to move—
press
CONTRAST to change the
side to move. Finally, press
CLEAR to play or to have King
Arthur analyze the position.
ENGLISH
NEARLY ALL OPERATIONAL PROBLEMS ARE CAUSED BY INCOR-
RECTLY REGISTERING MOVES! KING ARTHUR CAN’T SEE YOUR
MOVES
, HE HAS TO “FEEL” THEM. REMEMBER—ALWAYS FOL-
LOW THE SIMPLE TWO-STEP
PROCEDURE
:
1. P
USH THE FROM SQUARE; LISTEN FOR
THE CONFIRMING
, HIGH-PITCHED BEEP.
2. P
USH THE TO SQUARE; LISTEN FOR
THE CONFIRMING
, HIGH-PITCHED BEEP.
I
F A LOW-PITCHED BEEP SOUNDS, LOOK CAREFULLY AT THE
LCD AND FOLLOW THE DIRECTIONS DISPLAYED TO REPLACE
THE ILLEGALLY MOVED PIECE
. THEN MAKE A LEGAL MOVE.
36
KING ARTHUR
CHAPTER 10:
IMPORTANT TECHNICAL
DETAILS