Filter
Top Products
assembly instructions
-9-
Step 2:
Cap the Rear Upright (4) with the 2" Sq
End Plug (43). Attach the Rear Upright
(4) to the Base Frame (1) using three
3/8" x 3/4" Hex Head Bolts (73) and
three 3/8" Washers (75) as shown in
FIG 4.
Insert the 1" Bushings (46) into the outer
holes in the Base Frame (1) as shown
in FIG 5.
ASSEMBLY
FIG-4
FIG-5