Filter
Top Products
Step 3:
Insert both Guide Rods (5) through the Rubber
Doughnuts (47) and into the holes in the Base
Frame (1) as shown in FIG 6. Carefully stack
the Weight Plates (8) one at a time by lifting
them to the top of the Guide Rods (5), inserting
the weights through the rods and slowly lowering
each weight. Attach the Select Rod (6) to the
Top Plate (7) using the Top Plate Bolt (71).
Insert the Top Plate (7) over the Guides (5) and
through the Top Weight Plate (8) then secure
with the Select Pin (58) as shown in FIG 7.
ASSEMBLY
assembly instructions
-10-
FIG-7FIG-6