Filter
Top Products
-30-
maintenance
How to Maintain the EVO 1CD
Treadmill:
Proper maintenance is very important
to ensure your treadmill is always in top
working condition. Improper
maintenance could cause damage or
shorten the life of your treadmill and
exceed the LIMITED WARRANTY
coverage.
IMPORTANT: Never use abrasives or
solvents to clean the treadmill. To
prevent damage to the computer, keep
liquids away and keep it out of direct
sunlight.
Inspect and tighten all parts of the
treadmill regularly. Replace any worn
parts immediately.
BELT ADJUSTMENT:
The running belt has been adjusted
properly by the factory. However
transportation, uneven flooring or other
unpredicted reasons could cause the
belt to shift off center resulting in the
belt rubbing with the plastic side rail or
end caps and possibly causing damage.
To adjust the belt back to it’s proper
position please follow the directions
below:
1. If your belt tends to walk to the right,
rotate the right tension bolt clockwise.
We recommend adjustments of 1/4 turn
at a time, and follow with a test. If your
belt continues to walk to the right, simply
adjust the left belt tension bolt by turning
it 1/4 turn counterclockwise, follow with
a test.
2. If your belt tends to walk to the left,
rotate the left tension bolt clockwise 1/4
turn at a time, and follow with a test. If
the belt continues to walk to the left,
simply adjust the right tension bolt
counterclockwise.
3. If your belt appears to be loose, simply
tighten both bolts evenly 1/4 turn. If it
appears tight, simply loosen both bolts
evenly 1/4 turn.
IMPORTANT STEPS
Tension bolts for belt adjustment
BELT ADJUSTMENT