Filter
Top Products
to POWER ON status, press the STOP button any time.
The DISTANCE LED will light up, show the preset distance as 3MI/5KM and begin blinking. After press the
button. Press the INCLINE UP/DOWN buttons to set up the ideal distance then press the START button to
start. After pressing the START button the DISTANCE counts down from the preset distance. The other
information counts up until the treadmill stops. The Speed starts from 2MPH/3.2KMPH and incline starts from
level 0. Press the SPEED UP/DOWN buttons to adjust the speed. Press the INCLINE UP/DOWN buttons to
adjust the incline level.
During exercise press STOP to pause the program. Speed and Incline Level return to the beginning levels while
the other information (Time, Distance, Calories) is paused. To recall values and resume exercising press START.
Pressing the STOP button again within 30 seconds returns all data to zero and the computer returns to POWER
ON status. If no buttons are pressed within 30 seconds the computer automatically returns to POWER ON status
and all data returns to zero.
GOAL COURSE CALORIES
When the computer is in POWER ON status press the button on the console. The LED button lights up.
If no buttons are pressed within 3 minutes the program will return to POWER ON status. If wish to return to
POWER ON status, press the STOP button any time.
The CALORIES LED will light up and show the preset calories burned as 050 and blinking. After press the
button. Press the INCLINE UP/DOWN buttons to set up the desired calories then press the START button
to start. After pressing the START button the CALORIES count down from the preset calories. The other
information counts up until the treadmill stops. The Speed starts from 2MPH/3.2KMPH and the incline starts
from level 0. Press the SPEED UP/DOWN buttons to adjust the speed. Press the INCLINE UP/DOWN buttons
to adjust the incline level.
During exercise press STOP to pause the program. The Speed and Incline Level return to the beginning levels
while the other information (Time, Distance, Calories) is paused. To recall values and resume exercising press
START. Pressing the STOP button again within 30 seconds returns all data to zero and the computer returns
to POWER ON status. If no buttons are pressed within 30 seconds the computer automatically returns to POWER
ON status and all data returns to zero.
20 MINUTE FAST RUN
When the computer is in POWER ON status press the button on the console then press START to start the
program. If no buttons are pressed within 3 minutes the program will return to POWER ON status. At this time
the LED button will light up. The Time counts down from 20:00. The other information will count up until
the treadmill stops. The SPEED and INCLINE level follow the preset program.
During exercise press STOP to pause the program. The Speed and Incline Level will return to the beginning
CONSOLE OPERATION
computer instructions
-23-