Filter
Top Products
PPoowweerr sseeeemmss iinnccoorrrreecctt
·Torque value is not zeroed to manually zero torque go to current watts and hold down the
select button until watts disappears.Torque is now being displayed.To zero torque hold down
the select button until the value reads zero.To exit torque mode press select once.If read zero
the torque does not seem to recalibrate the unit call Saris Cycling Group customer service at
1-800-783-7257.
SSppeeeedd sseeeemmss iinnccoorrrreecctt
· Wheel size incorrect -refer to the chart on page 25 and enter the correct size in setup mode.
TTrraannssmmiissssiioonn iiccoonn ffllaasshheess rraappiiddllyy
· Hub batteries need replacement - replace the hub batteries as shown on page 34 of
the User Manual.
Glossary
CCoommppuutteerr
- Refers to the yellow handlebar or stem mounted device.
HHeeaarrtt RRaattee ((HHRR))
- This displays current HR. Max and average values are displayed if [MAX] or
[AVG] is selected. NOTE:A non-coded chest strap must be used in order for the console to
39