CycleOps PowerTap Bicycle Accessories User Manual


 
CCOOMMPPUUTTEERR BBAATTTTEERRIIEESS
The PowerTap SL2.4 has batteries in the hub and computer.Computer bat-
teries typically need to be changed every 400 hours of use.The computer
will also say “low bat”when the computer battery needs to be changed.This
message is displayed after a “clr”is performed.To replace computer battery
(Type CR2032),remove the computer from the mount.Remove the battery
cover on the back of the computer (use a cone wrench to remove the bat-
tery cover),exchange the battery,and replace the cover as shown below
(FIGURE 29).
TTEECCHHNNIICCAALL SSPPEECCIIFFIICCAATTIIOONNSS
Accuracy +/-1.5%
Signal Transmission 2.4 Ghz
Interval Data Storage Unlimited
Interval Display 9 Intervals (internal recording)
Operational Temperature 0 to 40 degrees c or 32 to 104 f
Battery Life (Hub) 300 hours approx.
Battery Life (Console) 400 hours approx.
Battery Type (Hub) Type 357 or EPX 76 (2 ea)
Battery Type (CPU ER2032
RRAANNGGEE OOFF MMEEAASSUURREEMMEENNTT
Power 0-1999 Watts
Torque 0-1999 inch-lbs.
Speed 2-59 mph (3-95 KPH)
Distance 0.00 to 9999.99 (Miles)
Trip Time 0.00.00-999.99 Minutes
Cadence 40-140 RPM
Total energy 0-99999 Kilojoules
Odometer 0-99999 Miles or Kilometers
Heart Rate 0-255 BPM (Beats per Minute)
34
FIGURE 29