Filter
Top Products
CCaaddeennccee ((CC))
Cadence is measured at the hub by analyzing the way a rider applies torque
through the pedal stroke since there are natural power differences in the pedal
stroke. The rate of pedaling is shown from 20 to 240 RPM.
NOTE:An optional wireless cadence sensor is available to measure cadence at
the crank.
1) Press [MODE] to scroll the cursor to the bottom line of the main display.
2) Press [SELECT] to toggle through the multi-function displays until the "C" icon is displayed.
(FIGURE 18)
17
365
25
89
WATTS
3
MI
C
FIGURE 18
CCYYCCLLEE CCOOMMPPUUTTEERR MMOODDEE
Access to the Cycle Computer Mode is also gained in the cadence function.This fun-
tion allows the PowerTap SL2.4 computer to function as a cycle computer in the
absence of the PowerTap hub.This function is useful when the PowerTap SL2.4 hub is
not present such as in racing situations where lighter racing wheels are used.NOTE:In
Cycle Computer Mode heart rate is displayed in the top line of the main display and
power data is no longer displayed.To enter Cycle Computer Mode:
1) Press [MODE] to scroll the cursor to the bottom line of the main display.
2) Press [SELECT] to toggle through the mult-function displays until the “C”icon is dis-
played.
3) Hold [SELECT] and the word “WATTS”will disappear from below the top line.Place
magnet or rear wheel so it passes the receiver at the line or the sensor.
4) To return to current power function hold [SELECT] until the word “WATTS”is dis-
played under the top line of the main display.