Filter
Top Products
30
e-Train Data™
Reference:
The battery life is approximately 50 hours (alkaline battery).
The interface unit continues to consume battery when the switch is on. When not using, turn
off the switch to save the battery life.
If the battery indicator does not turn on, replace the battery with new ones.
Connecting with PC
Connect the cable of the interface unit to your PC’s RS232C terminal (serial port).
Caution:
• If the cable is not securely connected to the terminal, the interface unit might fail to transmit
data.
• The 9-pin connector is applicable to IBM (or IBM PC/AT) computers. For other computers,
an adapter may be needed.
Installing MSC-unit
Caution:
If MSC-unit is not securely connected to the contacts of interface
unit, the unit might fail to download data.
1. Place your MSC-unit on the interface unit as illustrated. Hook
the bottom side1 of the unit first, and then push the other
side2. The unit clicks into position.
Caution:
Make sure of the position of the MSC-unit. If it is installed incor-
rectly, it might cause trouble to the unit.
2. Turn on the power switch3 and see if the battery indicator turns
on.
Removing MSC-unit
After download is completed, turn off the power switch and push
the release-button. The MSC-unit pops out.
Release button
Power switch
Hook
Stage
Battery indicator
PC’s RS232C terminal
(serial port)