Filter
Top Products
10
1
3
7
8
6
4
2
5
How to Adjust each part
1 Level Adjustment
• Turn the level adjuster on the rear
leg so that the unit is placed stably.
• When the indication line on the
level adjuster is at the top, the rear
leg is at the same level as the
caster of the front leg.
2 Adjusting Seat Position
• The seat position can be adjusted
while pulling up the seat lock pin.
When desired seat position is ob-
tained, release the lock pin free
and move the seat slightly and the
lock pin will click into the nearest
hole by spring pressure. Holes are
provided at an interval of 3 cm(1-
3/16").
Note: When sliding the
seat, take care not to break the
pulse sensor cable.
indication line
level adjuster
SLIDE
PULL
lock pin
3 cm(1-3/16")
R
EC-3
7
0
0
1
3
2
4
11
R
Recommended exercise posture
• Adjust the seat position as illustrated.
Find the position where your knee is
slightly bent when the pedal is at the
farthest position.
Remark: When moving the main
unit, lift the rear frame holding by
the seat height lock knob, and roll
the casters.
3 Adjusting Seat Height
• The seat height can be adjusted at
your choice.
• Loosen and remove the seat
height lock knob, supporting the
seat pipe with the other hand.
• Move up or down the seat pipe to
the desired height and screw-in
the seat height lock knob. While
tightening the knob lift the seat
pipe slightly for easier screwing.
Holes are provided at an interval
of 3 cm(1-3/16").
4 Adjusting Pedal Belts
• It is possible to adjust the pedal
belt length according to your
shoes size.
seat height lock knob
seat pipe
seat height lock knob
casters