Filter
Top Products
Note
●
Note that the actual operation
you need to perform depends
on the type of phone you are
using. For details, see your
phone documentation.
●
Clearing Pairing Information from
the Watch
1.
X Pull out the crown to the second
click.
Crown
2.
X Hold down (D) for about 5 seconds.
This will cause the second hand to
perform one revolution
and clear the
watch’s current pairing information.
3.
X Push the crown back in.
Connecting with Another Phone
You need to perform the operation below
whenever you buy a different phone or
when you want to establish a Bluetooth
connection with another phone.
1. Clear the current pairing info.
2. Pair the watch with the other phone.
Connecting a Different Watch to a
Phone
You should perform the steps below
before pairing a different watch with the
phone, such as after you buy a new
watch.
●
Pairing the Watch with a Phone
1.
Y On CASIO WATCH+, tap
“Connection settings”.
2.
Y Tap “Connect new watch”.
3.
Y Select the name of the watch you
want to connect to and then tap
“Next”.
●
From this point, follow the
instructions that appear on your
phone’s screen to complete the
pairing operation.
●
Connecting with a Watch that is
Already Paired
1.
Y On CASIO WATCH+, tap
“Connection settings”.
2.
Y From the “Previously registered
watch”
list, tap
the name of the phone
you want to connect with.
3.
Y Tap “Connect to this ***”.
●
Follow
the instructions
that appear
on your phone’s screen to
complete the connection
operation.
Important!
●
A phone can be connected with
only one watch at a time. To
connect to another watch, you
need to terminate the current
connection.
Watch Settings
Use the procedure below to configure
current Home Time and Dual Time
settings manually.
Getting ready
Perform this procedure in the Calendar
Mode. Use (A) to navigate to the
Calendar Mode.
l Navigating Between Modes
Calendar Mode
Setting the Time and Day
While the watch is connected to a phone,
it will automatically
adjust its day and time
settings to those of the phone. If the
watch is not connected to a phone, use
the procedure below to adjust its day and
time settings.
1. Pull out the crown to the second click.
This causes the second hand to
move to 12 o’clock, the mode hand
to move to 0, and enables the hour
and minute setting operation.
●
Crown operation is disabled while
the mode hand is moving.
MinutesHours
Crown
Mode hand
2. Rotate the crown to adjust the hour
and minute settings.
●
The Dual Time setting is also
adjusted in accordance with the
current time setting. Crown
operation is disabled while the
Dual Time setting is being
adjusted.
Operation Guide 5419
9