Filter
Top Products
Measuring a Split Time
30
Speed
Minutes
Hours
24-hour
Seconds
1. Use the operations below to
measure elapsed time.
B
D
B
Stop
Split*
Start
* Each press of (D) causes the
elapsed time up to that point (split
time) to be indicated for 10
seconds.
2. Press
(D) to reset the elapsed time to
all zeroes.
3. Press (A) twice to return to the
Calendar Mode.
Note
●
The watch has enough memory
to store up to 100 split time
records. You can use CASIO
WATCH+ to view split time
records.
Alarms
The watch will beep when the alarm time
is reached.
Getting ready
Perform this procedure in the Alarm
Mode. Use (A) to navigate to the Alarm
Mode.
l Navigating Between Modes
Alarm Mode
Configuring Alarm Settings
1. Pull out the crown to the first click.
This turns on the alarm.
Alarm on
Crown
Minutes
Hours
24-hour
2. Rotate the crown to change the alarm
time setting.
3. Push the crown back in.
4.
Press (A) once to return to the
Calendar Mode.
Enabling/Disabling the
Alarm
Each press of (B) toggles the alarm
between on and off.
OFFON
Stopping an Alarm
While the alarm is sounding, press any
button to stop it.
Hand Alignment Correction
Strong magnetism or impact can cause
the time indicated by the hands and the
day indicator to
go out of alignment. If this
happens, correct hand alignment.
Adjusting Hand Alignment
1. Pull out the crown to the first click.
2. Hold down (D) for about five
seconds.
This enables adjustment of small
hour hand, small minute hand, and
small 24-hour hand alignment.
Small 24-hour hand
Small minute
hand
Small hour hand
3. Rotate the crown to align the small
hour hand, small minute hand, and
small 24-hour hand with 12 o’clock.
4. Press (A).
This enables adjustment of mode
hand alignment.
Mode Hand
5. Rotate the crown to align the mode
hand with 0.
6. Press (A).
This enables adjustment of hour
hand, minute hand, and 24-hour
hand alignment.
24-hour hand
Minute hand
Hour hand
7. Rotate the crown to align the hour
and minute hands with 12 o’clock.
Operation Guide 5419
11