Filter
Top Products
Note
●
The types of accounts listed
below are supported for
registration.
@gmail.com, @yahoo.com,
@yahoo.co.jp, @icloud.com,
@aol.jp, @aol.com, @aim.com,
@i.softbank.jp, @outlook.jp,
@outlook.com
●
Checking for Mail
1.
X If the watch is connected with a
phone, press (D). If the watch is not
connected with a phone, hold down
(C) for about 0.5 seconds.
The mode hand will move to l
or ¢.
l
: You’ve got new mail.
¢: No new mail.
●
If you’ve got new mail
Use your phone to view your mail.
Phone Finder
You can use phone finder to trigger a
tone on the
phone to make it easy to find.
The tone is forced to sound even if the
phone is in the manner mode.
●
This function is available only while
CASIO WATCH+ is running on the
phone.
Important!
●
Do
not
use
this function in areas
where phone call tones are
restricted.
●
The tone sounds at a high
volume. Do not
use this function
when listening to phone output
over earphones.
1.
X If the watch is connected with a
phone, press (C) to terminate the
connection.
2.
X Hold down (A) for about two
seconds.
This will cause the watch to enter the
Calendar Mode.
30
3.
X Hold down (D) for about 0.5
seconds.
This will cause the watch’s second
hand
to move
to e and the phone will
sound a tone.
●
It will take a few seconds before
the phone tone sounds.
4.
X Press any button to stop the tone.
●
You
can press
any watch button to
stop the phone tone only during
the first 30 seconds after it starts to
sound.
Configuring Watch Settings
You can use CASIO WATCH+ to specify
the Bluetooth connection auto
disconnect time, to adjust the current
time settings, and to configure other
settings.
1.
Y Tap the “CASIO WATCH+” icon.
2.
X Hold down (C) for about 0.5
seconds.
This establishes a connection
between the watch and phone.
3.
Y Tap in the following sequence: f
n “Watch settings”.
4.
Y Select the setting you want to
change and then perform the
operation shown on the phone
screen.
Returning the Watch to Its
Factory Default Settings
This section explains how to use CASIO
WATCH+ to return the watch settings
below to their initial factory defaults.
●
Time adjustment
●
World time
●
Alarm
●
Stopwatch
●
Connection time
1.
X Pull out the crown to the second
click.
2.
X Hold
down
(C)
for about 5 seconds.
This will cause the second hand to
perform one revolution and return
the applicable settings to their
factory defaults.
Operation Guide 5419
7