Bowflex 1000 Home Gym User Manual


 
24
Owner’s Manual
Workout Instructions
6. Press FASTER to start the belts. Starting belt speed is 0.7 MPH (1.1 KPH).
Note: Belts may take two to three seconds to start.
7. Once the belts have started, you may step onto the treadles at any time.
Note: If you are new to the Bowflex
®
TreadClimber
®
machine, make sure to start your workout at a slower speed,
gradually increasing belt speed as your endurance and fitness levels increase.
 
Starting a TreadClimber
®
Workout (TC1000)
To avoid injury, do not stand on the walking belts while starting or stopping them.
1. Push START/STOP to start the walking belts—TIME starts counting as soon as you start the belts.
Note: The console will NOT power up if the Safety Key is not properly inserted into the Safety Keyhole.
2. Once the belts have started, you may step onto the treadles at any time.
3. Press FASTER to increase your speed. Starting belt speed is 0.5 MPH (0.8 KPH).
Note: If you are new to the TreadClimber
®
machine, make sure to start your workout
at a slower speed, gradually increasing belt speed as your endurance and fitness levels increase.
 