Filter
Top Products
Chapter 10. Statistics
61200275L1-1 TSU IQ+ User Manual 10-29
Rx BECN
Number of frames received on the network port over the specified
DLCI with the BECN bit of the frame relay header enabled.
Tx BECN
Number of frames transmitted from the network port over the
specified DLCI with the BECN bit of the frame relay header
enabled.
Rx DE
Number of frames received on the network port over the specified
DLCI with the discard eligibility (DE) bit of the frame relay header
enabled.
Tx DE
Number of frames transmitted from the network port over the
specified DLCI with the DE bit of the frame relay header enabled.
Rx CR
Number of frames received on the network port over the specified
DLCI with the CR bit of the frame relay header enabled.
Tx CR
Number of frames transmitted from the network port over the
specified DLCI with the CR bit of the frame relay header enabled.
Lost Frames
Number of frames lost across the PVC. This field is applicable only
if the network port's S
EQUENCE
N
UMBER
C
HECKING
option is
ENABLED
.SeethesectionSeq Num Checking (SEQ #) on page 7-7.
Remote Lost Frames
Number of lost frames reported by the remote TSU IQ+. This field
is applicable only if the network port's S
EQUENCE
N
UMBER
C
HECKING
option is E
NABLED
. See the section Seq Num Checking
(SEQ #) on page 7-7.
Rx Burst Seconds
Amount of time (in seconds) that throughput in the receive
direction is greater than CIR.
Tx Burst Seconds
Amount of time (in seconds) that throughput in the transmit
direction is greater than CIR.