ADTRAN TSU IQ+ Heart Rate Monitor User Manual


 
Chapter 10. Statistics
10-18 TSU IQ+ User Manual 61200275L1-1
Px Type (listed for each interval)
The protocol type being examined for the given interval is
displayed in this field.
Px Rx Frames
In the Network Port view, this is the number of frames received on
the network port that match the selected protocol type. In the DLCI
view, this is the number of frames received on a particular DLCI
that match the selected protocol type.
Px Rx Bytes
In the Network Port view, this is the number of bytes received on
the network port that match the selected protocol type. In the DLCI
view, this is the number of bytes received on a particular DLCI that
match the selected protocol type.
Px Rx Dist%
The distribution percentages show what portion of the data can be
attributed to the protocols being tracked.
Px Tx Frames
In the Network Port view, this is the number of frames transmitted
on the network port that match the selected protocol type. In the
DLCI view, this is the number of frames transmitted on a particular
DLCI that match the selected protocol type.
When the
P
ROTOCOL
type selection is changed (see Protocols 1 and 2 on
page 9-4) the new selection is not accepted by the TSU IQ+ until the end
of the current timed interval. For example, if the TSU IQ+ is configured
for 5-minute timed intervals, and the
P
ROTOCOL
type selection is
changed at 12:25, the change will not be recognized until 12:30. This al-
lows the unit to display an accurate interval history of the
P
ROTOCOL
T
YPE
field.
When the P
ROTOCOL
type selection is changed, the P
ROTOCOL
T
YPE
field (P1 T
YPE
or P2 T
YPE
) for the current day total (left-most column
on the V
IEW BY
I
NTERVAL
screens) displays MIXED, indicating that the
displayed information represents more than one protocol type. Mixed is
also displayed for the day total on the V
IEW BY
D
AY
screen once the 24
hour period is complete.