Filter
Top Products
OPERATING YOUR ERGO BASIX
5
I. Attaching Your Heart Rate Monitor
Press Press
Step 1:
Moisten each of the two conductive fabrics of the Chest
Belt.
Step 2:
Insert the two Pins at the back of the transmitter into the
two mounting holes on the Conductive Fabric Chest Belt. Push
the transmitter downwards and lock the transmitter in place.
1.) Attach the transmitter belt to your chest
2.)
Attach your wrist monitor. The watch does not have to be
attached to your wrist to register your heart rate, but it should
be within 3 feet of your chest.
3.) Press MODE/SET button to start your heart rate reading.
Step 3: Adjust the tension of the Elastic Strap and check that
theconductive fabrics are firmly against your skin.