Filter
Top Products
GENERAL PRECAUTIONS
Do not operate buttons under water. Although your
watch is waterresistant, be sure that youdo not operate
its buttons under water as pressure can cause them to
leak.
Dry off transmitter after use. The transmitter will
automatically shut itself off once you have disconnected
it from your chest.However, it isimportant to thoroughly
dry it off afterevery use, sincemoisture in the electrodes
can cause it to remain on longer.
Electrode precautions.Be sure not toexcessively twist
or bend the electrode portions of the chest transmitter
(never bend backwards),especially when storing it.This
can permanently damage their conductivity and cause
mechanical damage to the internal circuit.
Global Reset. If your watch should ever get stuck or
act erratically due to dropping it, static shock or some
other unforeseen reasons, this feature will allow you to
reset the watch and return all settings back to their
internal defaults. To perform this function, press and
hold both buttons together for 3 seconds under any
mode. The watch will enter the shelf mode, which is of
the blank screen. Press any button to restart it. .
Caution: Global Reset will CLEAR UP EVERYTHING
that include your Personal Settings.
12
Chest Transmitter Battery Replacement
push push
Step 3: Lock the battery door firmly into place making sure the
O-ring seal does not get pinched or distorted.
Step 1: Remove the transmitter from the belt.(Fig.1)
Step 2: Use a coin to unlock the battery door, and then replace
the old battery inside with a new one. (Fig.2)
Fig.1
Fig.2
Lock
Unlock