Accusplit AH190M28 Fitness Electronics User Manual


 
Sec1:24-Sec1:25
24 25
5. To exit stopwatch mode, press the MEMORY button
to stop the stopwatch, then press the yellow MODE
button to return to STEP mode.
Mile/h
3.515:01
0:14:02
MODE
button
MEMORY
button
RESET
button
STOPWATCH/TIMER Mode
Using the Countdown Timer
1. Repeatedly press the yellow S1 (MODE) button until
the display is in STOPWATCH/TIMER mode. (Display
will show hours:minutes:seconds.)
2. S1: Press and hold the yellow MODE button to enter
SET mode. The HOUR display will start to blink.
3. S3: Press the S3 (MEMORY) button to increase the
HOUR display. Press the S3 (RESET) button to
decrease the HOUR display. Hold the button down
to change hours quickly.
Sec1:26-Sec1:27
26 27
4. S2: Press the yellow S2 (MODE) button to switch from
the HOUR display to the MINUTE display. The MINUTE
display will start to blink.
5. S3: Press the S3 (MEMORY) button to increase the
MINUTE display. Press the S3 (RESET) button to
decrease the MINUTE display. Hold the button down to
change minutes quickly.
6. S4: Press and hold the yellow S4 (MODE) button for
2 seconds to exit SET mode.
7. Press the S3 (MEMORY) button to begin countdown.
To stop or restart countdown at any time, press the
S3 (MEMORY) button again.
8. To reset Countdown Timer to 0 during countdown,
press the S3 (MEMORY) button to stop countdown,
then press and hold the yellow S1 (MODE) button to
return to SET Mode. Go through the SET process again
to return hours and minutes to 0. Finally, press and
hold the yellow S4 (MODE) button to exit SET Mode.
Press the yellow S1 (MODE) button once more to
return to STEP Mode.