Chapter 18 IPv6 Firewall
EMG1302-R10A User’s Guide
134
Add Firewall Rule
Service Name Enter a name that identifies or describes the firewall rule.
MAC Address Enter the MAC address of the computer for which the firewall rule applies.
Dest IP Address Enter the IP address of the computer to which traffic for the application or service is
entering.
The EMG1302-R10A applies the firewall rule to traffic initiations from this computer.
Source IP Address Enter the IP address of the computer that initializes traffic for the application or service.
The EMG1302-R10A applies the firewall rule to traffic initiating from this computer.
Protocol Select the protocol (TCP, UDP or ICMP) used to transport the packets for which you
want to apply the firewall rule.
Dest Port Range Enter the port number/range of the destination that define the traffic type, for example
TCP port 80 defines web traffic.
Source Port Range Enter the port number/range of the source that define the traffic type, for example TCP
port 80 defines web traffic.
Add Rule Click to add rule.
Firewall Rule
# This is your firewall rule number. The ordering of your rules is important as rules are
applied in turn.
ServiceName This is a name that identifies or describes the firewall rule.
MACaddress This is the MAC address of the computer for which the firewall rule applies.
DestIP This is the IP address of the computer to which traffic for the application or service is
entering.
SourceIP This is the IP address of the computer to which traffic for the application or service is
initialized.
Protocol This is the protocol (TCP, UDP or ICMP) used to transport the packets for which you
want to apply the firewall rule.
DestPortRange This is the port number/range of the destination that define the traffic type, for
example TCP port 80 defines web traffic.
SourcePortRange This is the port number/range of the source that define the traffic type, for example
TCP port 80 defines web traffic.
Action DROP - Traffic matching the conditions of the firewall rule are stopped.
Delete Click Delete to remove the firewall rule.
Reset
Table 55 Configuration > Security > IPv6 Firewall (continued)
LABEL DESCRIPTION
