Chapter 38 Access Control
GS2210 Series User’s Guide
322
poe
(For PoE
models only)
zyPoePowerPortOverload 1.3.6.1.4.1.890.1.15.3.59.4.1 This trap is sent when the port is turned
off to supply power due to overloading.
zyPoePowerPortShortCircuit 1.3.6.1.4.1.890.1.15.3.59.4.2 This trap is sent when the port is turned
off to supply power due to short circuit.
zyPoePowerPortOverSyste
mBudget
1.3.6.1.4.1.890.1.15.3.59.4.3 This trap is sent when the port is turned
off to supply power because the
requested power exceeds the total PoE
power budget on the Switch.
zyPoePowerPortOverloadRe
covered
1.3.6.1.4.1.890.1.15.3.59.4.5 This trap is sent when the port is turned
on to recover from an overloaded state.
zyPoePowerPortShortCircuit
Recovered
1.3.6.1.4.1.890.1.15.3.59.4.6 This trap is sent when the port is turned
on to recover from a short circuit.
zyPoePowerPortOverSyste
mBudgetRecovered
1.3.6.1.4.1.890.1.15.3.59.4.7 This trap is sent when the port is turned
on to recover from an over system
budget.
temperature zyHwMonitorTemperatureO
utOfRange
1.3.6.1.4.1.890.1.15.3.26.2.2 This trap is sent when the temperature
goes above or below the normal
operating range.
zyHwMonitorTemperatureO
utOfRangeRecovered
1.3.6.1.4.1.890.1.15.3.26.2.7 This trap is sent when the temperature is
recovered from the out of range to
normal operating range.
voltage zyHwMonitorPowerSupplyV
oltageOutOfRange
1.3.6.1.4.1.890.1.15.3.26.2.3 This trap is sent when the voltage goes
above or below the normal operating
range.
zyHwMonitorPowerSupplyV
oltageOutOfRangeRecovere
d
1.3.6.1.4.1.890.1.15.3.26.2.8 This trap is sent when the power supply
voltage is recovered from the out of
range to normal operating range.
reset zySysMgmtUncontrolledSys
temReset
1.3.6.1.4.1.890.1.15.3.49.2.1 This trap is sent when the Switch
automatically resets.
zySysMgmtControlledSyste
mReset
1.3.6.1.4.1.890.1.15.3.49.2.2 This trap is sent when the Switch resets
by an administrator through a
management interface.
zySysMgmtBootImageInco
nsistence
1.3.6.1.4.1.890.1.15.3.49.2.3 This trap is sent when the index number
of image which is loaded when the Switch
starts up is different from what is
specified via the CLI.
RebootEvent 1.3.6.1.4.1.890.1.5.1.1.2 This trap is sent when the Switch reboots
by an administrator through a
management interface.
timesync zyDateTimeTrapTimeServer
NotReachable
1.3.6.1.4.1.890.1.15.3.82.3.1 This trap is sent when the Switch’s date
and time is not manually entered or the
specified time server is not reachable.
zyDateTimeTrapTimeServer
NotReachableRecovered
1.3.6.1.4.1.890.1.15.3.82.3.2 This trap is sent when the Switch’s real
time clock is up to date.
intrusionlock zyPortIntrusionLock 1.3.6.1.4.1.890.1.15.3.61.3.2 This trap is sent when intrusion lock
occurs on a port.
loopguard zyLoopGuardLoopDetect 1.3.6.1.4.1.890.1.15.3.45.2.1 This trap is sent when loopguard shuts
down a port.
Table 159 SNMP System Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
