Chapter 9 VLAN
GS2210 Series User’s Guide
103
Figure 76 Advanced Application > VLAN > VLAN Configuration > Voice VLAN Setup
The following table describes the fields in the above screen.
Table 37 Advanced Application > VLAN > VLAN Configuration > Voice VLAN Setup
LABEL DESCRIPTION
Voice VLAN Global Setup
Voice VLAN Click the Voice VLAN radio button if you want to enable the Voice VLAN feature.
Type a VLAN ID number in the box next to the radio button that is associated
with the Voice VLAN. Click Disable radio button if you do not want to enable the
Voice VLAN feature.
Priority Select the priority level of the Voice VLAN from 0 to 7. Default setting is 5.The
higher the numeric value you assign, the higher the priority for this Voice VLAN.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Clear Click Clear to reset the fields to default settings.
Voice VLAN OUI Setup
OUI address Type the IP Phone manufacturer’s OUI MAC address. The first three byes is the
manufacturer identifier, the last three bytes is a unique station ID.
OUI mask Type the IP Phone manufacturer's OUI mask address.
Description Type an description up to 32 characters for the Voice VLAN device. For example:
Siemens.
Add Click Add to save your changes to the Switch’s run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Index This field displays the index number of the Voice VLAN.
OUI address This field displays the OUI address of the Voice VLAN.
