Troubleshooting
152 En
■ iPod
In case of a transmission error without a status message appearing in the front panel and in the video monitor, check the connection to your iPod (see page 38).
■ Auto Setup
Before Auto Setup
Note
Status message Cause Remedy See page
Loading... This unit is in the middle of recognizing the
connection with your iPod.
This unit is in the middle of acquiring song lists
from your iPod.
Connect error There is a problem with the signal path from your
iPod to this unit.
Turn off this unit and reconnect the Yamaha iPod universal
dock to the DOCK terminal of this unit.
38
Try resetting your iPod.
—
Unknown iPod The iPod being used is not supported by this unit. Only iPod (Click and Wheel), iPod nano, and iPod mini are
supported.
—
iPod connected Your iPod is properly stationed in a Yamaha iPod
universal dock (such as the YDS-10, sold
separately) connected to the DOCK terminal of
this unit, and the connection between your iPod
and this unit is complete.
Disconnected Your iPod was removed from a Yamaha iPod
universal dock (such as YDS-10 sold separately)
connected to the DOCK terminal of this unit.
Station your iPod back in a Yamaha iPod universal dock (such
as YDS-10 sold separately) connected to the DOCK terminal
of this unit.
38
Unable to play This unit cannot play back the songs currently
stored on your iPod.
Check that the songs currently stored on your iPod are
playable.
—
Store some other playable music files on your iPod.
—
Error message Cause Remedy See page
Connect MIC! Optimizer microphone is not connected. Connect the supplied optimizer microphone to the
OPTIMIZER MIC jack on the front panel.
47
Unplug Phones! Headphones are connected. Unplug the headphones.
—
No Setup Menu! No check items are selected as the measurement
items.
Select the desired check item. 48
Memory Guard! “Memory Guard” is set to “On”. Set “Memory Guard” to “Off”. 113
