Graphical user interface (GUI) menu
100 En
Center (Center speaker)
Surround (Surround left/right speakers)
y
See page 23 for the connection information of the surround speakers.
Surround Back
(Surround back left/right speakers)
y
See page 23 for the connection information of the surround speakers.
Cross Over (Cross over)
Use this feature to select the crossover frequency of the speaker(s)
that is set to “Small”. All frequencies below the selected frequency
will be sent to the subwoofers or to the speakers set to “Large” in
“Speaker Set” (see pages 99).
Choices: 40Hz, 60Hz, 80Hz (THX), 90Hz, 100Hz, 110Hz, 120Hz,
160Hz, 200Hz
y
If your subwoofers can adjust the output volume and the crossover
frequency, set the volume to about half way (or slightly less) and set the
crossover frequency to the maximum.
Front Presence (Front presence speakers)
Use this feature if you want to use the front presence speakers
connected to this unit.
• If you set “Front Presence” to “None”, you cannot activate the CINEMA
DSP HD³ mode (see page 64).
• “Dialogue Lift” is available when “Front Presence” is set to “Yes” and
headphones are not connected.
Rear Presence (Rear presence speakers)
Use this feature if you want to use the rear presence speakers
connected to this unit.
Subwoofer (Subwoofer)
Configuration (Subwoofer configuration)
Use this feature to select the configuration of the subwoofers
(see page 26).
y
If your subwoofer can adjust the output volume and the crossover
frequency, set the volume to about half way (or slightly less) and set
the crossover frequency to the maximum.
Choice Descriptions
Large
Select this setting when the center speaker is large.
Small
Select this setting when the center speaker is small.
None
Select this setting when you do not use the center
speaker. The center channel signals are directed to the
front left and right speakers.
Choice Descriptions
Large
Select this setting when the surround speakers are large.
Small
Select this setting when the surround speakers are small.
None
Select this setting when you do not use the surround
speakers. This unit is set to the Virtual CINEMA DSP
mode (see page 64), and “Surround Back” is
automatically set to “None”.
Choice Descriptions
Large x1
Select this setting when the single surround back speaker
is large.
Large x2
Select this setting when the surround back left and right
speakers are Large.
Small x1
Select this setting when the single surround back speaker
is small.
Small x2
Select this setting when the surround back left and right
speakers are small.
None
Select this setting when you do not use the surround
back speakers. The surround back channel signals are
directed to the surround left and right speakers.
Choice Descriptions
Yes
Select this setting when you use the front presence
speakers.
None
Select this setting when you do not use the front
presence speakers. “Rear Presence” is automatically set
to “None”.
Notes
Choice Descriptions
Yes
Select this setting when you use the rear presence
speakers.
None
Select this setting when you do not use the rear presence
speakers.
Choice Descriptions
Front & Rear
Select this setting when you place the subwoofers to
the front and rear of the listening room.
Stereo
Select this setting when you place the subwoofers to
the left and right of the listening room.
Monaural
Select this setting when you use a single subwoofer.
None
Select this setting when you do not use a subwoofer.
