TL-WR840N 300Mbps Wireless N Router User Guide
- 59 -
4. Click Next when finishing creating the advanced schedule entry, and the next screen will
appear as shown in Figure 4-50.
Figure 4-50 Quick Setup – Create an Internet Access Control Entry
¾ Rule - In this field, create a name for the rule. Note that this name should be unique (e.g.
Rule_1).
¾ Host - In this field, select a host from the drop-down list for the rule. The default value is the
Host Description you set just now.
¾ Target - In this filed, select a target from the drop-down list for the rule. The default value is
the Target Description you set just now.
¾ Schedule - In this field, select a schedule from the drop-down list for the rule. The default
value is the Schedule Description you set just now.
¾ Status - In this field, there are two options, Enabled or Disabled. Select Enabled so that the
rule will take effect. Select Disabled so that the rule won't take effect.
5. Click Finish to complete adding a new rule.
Method Two:
1. Click the Add New… button and the next screen will pop up as shown in Figure 4-51.
2.
Give a name (e.g. Rule_1) for the rule in the Rule Name field.
3. Select a host from the Host drop-down list or choose “Click Here To Add New Host List”.
4. Select a target from the Target drop-sown list or choose “Click Here To Add New Target
List”.
5. Select a schedule from the Schedule drop-down list or choose “Click Here To Add New
Schedule”.
6. In the Status field, select Enabled or Disabled to enable or disable your entry.
7. Click the Save button.
