Supplementary Specifications
129
6
❖
❖❖
❖ Duplex
• You cannot use the following copy paper with this function:
• Paper thicker than 105 g/m
2
, 28 lb.
• Paper thinner than 64 g/m
2
, 17 lb.
• Translucent paper
• OHP transparencies
• Label paper (adhesive labels)
• When an odd number of originals is placed in the ADF, the back of the last
page of copied paper is blank.
• During copying, the image is shifted to allow for the binding margin.
• The following paper sizes can be duplexed: A3L, B4 JISL, A4KL, B5
JISKL, A5KL, 11" × 17"L, 8
1
/
2
" × 14"L, 8
1
/
2
" × 13"L, 8
1
/
2
" × 11"KL,
8
1
/
4
" × 13"L, 8" × 13"L, 7
1
/
4
" × 10
1
/
2
"L 5
1
/
2
" × 8
1
/
2
"L, 16KKL, 8KL
❖
❖❖
❖ Combine
• You cannot use the bypass tray with this function.
• In this mode, the machine selects the reproduction ratio automatically.
This reproduction ratio depends on copy paper sizes and the number of
originals.
• The reproduction ratios you can specify are 25–400%.
• If the calculated ratio is under the minimum ratio, it will be automatically
adjusted to within acceptable range. However, with some ratios, parts of
the image might not be copied.
• You cannot use custom size paper.
• A separation line between originals can be printed with the User Tools. ⇒
p.115 “Separation Line in Combine”
• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies proper-
ly.
• If the number of originals placed is less than the number specified for com-
bining, the last page segment will be left blank as shown.
ThemisC1_GB_Copy_F_FM.book Page 129 Wednesday, June 22, 2005 10:00 AM
