|
User’s Guide: English 215
1 Turn off the power switch.
2 Lift the document tray up (1) and back on its hinges.
Fig4_01.eps
Separation rubber
Document tray
!
Open the control panel fully, being careful not to
damage the separation rubber (2).
3 Pull out the jammed document.
4 Return the document tray to its original operating
position. Push down until it locks in place.
5 Turn the power switch back on.
Clearing a Document Jam
When a document jam occurs, your machine beeps and an
error message appears in the display. If the jammed document
appears to be positioned straight in your feeder, press the
Stop key to try to feed the document the rest of the way
through the feeder. If this fails, follow the instructions below.
1
2
