Insertinga Battery into the Charging Pocket
Inserting a Battery into the Charging Pocket
Caution! It is important that battery packs are inserted into the charging pocket correctly. Inserting the battery incorrectly could
result in damage to the battery pack or the charger.
Caution! Do not “slam”the battery pack into the chargingpocket. Damage may result.
When preparing the battery pack forinsertioninto the battery charging pocket, hold the battery with its four charging contacts in
linewith the charging contacts in the charging pocket. Aim the retaining catch towards theback of the charger/analyzer.
Tilt the front end(without the latch)of the battery pack into the front end of the battery charging pocket, and firmly press the
other end (with thelatch) until it is fully inserted into the battery charging pocket. Push down on the battery pack until the
retaining clip on the battery catches on the retaining bracket in the pocket.
Remove the Battery from the Charging Pocket
Push the latch toward the battery and, grasping thebattery andlatch firmly, take the battery out of thecharging pocket.
E-EQ-MX7CHGROG-E-ARC [ 6 ] MX7 Battery Multi-Charger/AnalyzerUser Guide
