Page 8 of 16 2342-222/2444A3WH8, 2342-422, 2342-522 Rev: 11/19/2013 8:18 AM
Turn Unit On/Off (Pocket Mode)
The Mini Remote features a power switch located next to the Set button. If you plan on carrying the Mini
Remote in your pocket it is recommended that you turn it off to prevent buttons from accidentally being
pressed. This is also recommended if your Mini Remote will not be in use for long periods of time.
Stuck Button
If a button on Mini Remote is held for more than 4 minutes, the Mini Remote will automatically stop
transmitting to preserve battery life. The Mini Remote will automatically turn back on when the button that
was depressed is no longer being pressed.
Advanced Features
Make Mini Remote Button a Controller of Multiple Responders
1) Tap the Mini Remote scene button of choice (^ or v will both work)
2) Press and Hold Set Button until it beeps
LED will being blinking green
3) Tap Set Button
LED will being double-blinking green
4) Adjust each responder to the desired state, then press and hold responder set button until Mini
Remote double-beeps
LED will continue double-blinking green
5) When all your devices have been added, tap Mini Remote’s Set Button
Mini Remote will double-beep and its LED will turn off
Remove Mini Remote Button as a Controller of Multiple Responders
1) Tap Mini Remote scene button of choice (^ or v will both work)
2) Press and hold set button until it beeps
LED will begin blinking green
3) Press and Hold Set Button a 2
nd
time for 3 seconds - until you hear a beep
LED will begin blinking red
4) Tap Set Button
LED will begin double-blinking red
5) For each Responder you wish to remove, Press and Hold its Set Button until Mini Remote double-
beeps
LED will continue to double-blink red
6) When all your devices have been removed, tap Mini Remote’s Set Button
Mini Remote will double-beep and its LED will turn off
(right On, left Off)
