A SERVICE OF

logo

Open as PDF
next previous
Figure C-9 Using the de -s Command
7. Repeat step 1 through step 6 for each partition.
Powering Off the System
To power off the system, follow these steps:
1. From the Command Menu, enter pe (Figure C-10).
Figure C-10 Power Entity Command
2. Enter the number of the cabinet to power off. In Figure C-10, the number is 0.
3. When prompted for the state of the cabinet power, enter off.
4. Enter ps at the CM> prompt to view the power status (Figure C-11).
Shutting Down the System 177