A SERVICE OF

logo

Open as PDF
next previous
1. On the SMS, open the following command prompt windows:
• One console window for each partition (MP CO option)
• One for initializing the RS command from the MP
• One for monitoring partition status (MP VFP option)
In each window, connect to the MP by entering the following:
telnet <MP hostname>
Or
telnet <IP address>
2. Enter the appropriate login and password at the MP prompts (Figure 3-41).
Figure 3-41 Logging In
The MP Main Menu appears (Figure 3-42).
Figure 3-42 Main MP Menu
3. Repeat steps 1 and 2 for each partition.
4. In one window bring up the command prompt by entering cm at the MP> prompt (Figure 3-43).
102 Installing the System