A SERVICE OF

logo

Open as PDF
next previous
1. To observe the power status, enter ps at the CM> prompt. A status screen similar to the one
in Figure 3-50 appears.
Figure 3-50 Power Status First Window
2. At the Select Device: prompt, enter b then the cabinet number to check the power status
of the cabinet. Observe Power Switch: on and Power: enabled (Figure 3-51).
Figure 3-51 Power Status Window
Figure 3-51 shows that cells are installed in slots 0 and 4. In the cabinet, verify that cells are
physically located in slots 0 and 4.
3. Press <CR> one more time to observe the power status (Figure 3-52).
Booting and Verifying the System 107