A SERVICE OF

logo

Open as PDF
next previous
List of Functions
62
f Mail Menu
When this is set, if the projector enters an abnormal/warning state, you are notified by e-mail.
Sub Menu Function
Mail Notification You can set whether to be notified by mail (On) or not (Off).
SMTP server You can input the IP addressg for the SMTP server for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Port Number You can input the port number for the SMTP server. The initial value is 25. You can input numbers between 1 to 65535.
Email Address 1/
Email Address 2/
Email Address 3
You can input the e-mail address of the destination to send the notification mail to. You can register up to three destinations. You can enter up to 32
single-byte alphanumeric characters for the mail addresses.
Setting a
Notification Event
You can select the abnormalities or warnings to be notified about by mail. When the selected abnormality or warning occurs in the projector, a mail
is sent to the specified "Destination address" notifying that an abnormality or warning has occurred. You can select multiple items from the
displayed items.