Part Names and Functions
10
Rear
Name Function
A
Monitor Out port Outputs the image signal from the computer
connected to the Computer1 input port to an
external monitor. This is not available for
component video
g signals or other signals
being input to any port other than the
Computer1 input port.
Audio Out port Outputs the sound of the image currently being
projected to external speakers.
s p.94
B
Power inlet Connects to the power cable. s Quick Start
Guide
C
S-Video input
port
For S-videog signals from video sources.
Video input port
For composite videog signals from video
sources.
B
J
ED
F
I
H
G
A
C
Audio-L/R input
port
These connect to the audio out port of
equipment that is connected to the S-Video or
Video input port. s Quick Start Guide
D
RS-232C port When controlling the projector from a
computer, connect it to the computer with an
RS-232C cable. This port is for control use and
should not normally be used. s p.99
E
Remote receiver Receives signals from the remote control.
s Quick Start Guide
F
Security slot (j) The security slot is compatible with the
Microsaver Security System manufactured by
Kensington. s p.40
G
USB port (Type A)
(EMP-1825 only)
Connects the memory for compatible digital
cameras and USBs, and projects image/movie
files and scenarios with the PC Free of
EasyMP. s p.91
H
LAN port
(EMP-1825 only)
When a LAN cable is connected, you can
monitor and control the projector over a LAN.
s p.95
I
USB port (Type B) Connects the projector to a computer by a
USB cable, and the image on the computer is
projected (EMP-1825 only). s Wireless LAN
Quick Connection Guide
Use this port also to connect with a computer
to use the wireless mouse function. s p.30
J
Computer1 input
port
For video signals from a computer and
component video
g signals from other video
sources.
Audio1 input port Connect to the audio out port of the computer
connected to the Computer1 input port.
Name Function
