25D-Link DAP-2690 User Manual
Section 3 - Configuration
WPA-Enterprise authentication
Cipher Type:
When WPA-Enterprise is selected, you must also
select a cipher type from the drop-down menu: Auto,
AES, or TKIP.
When WPA-Enterprise is selected, you must also
select a WPA mode from the drop-down menu: AUTO
(WPA or WPA2), WPA2 Only, or WPA Only. WPA and
WPA2 use different algorithms. AUTO (WPA or WPA2)
allows you to use both WPA and WPA2.
WPA Mode:
Enter the IP address of the RADIUS server. Click
External if the RADIUS server is on your network or
Internal if you are using the RADIUS server on the
DAP-2690.
Enter the RADIUS port (1812 is the default).
Enter the RADIUS secret.
Enable or disable Microsoft Network Access
Protection.
Enter the Accounting port (1813 is the default).
Enter the IP address of the Accounting server.
Select if you want to use a different server for
accounting.
Enter the Accounting secret.
Select the interval during which the group key will be
valid. The recommended value is 1800, as a lower
interval may reduce data transfer rates.
RADIUS Server:
RADIUS Port:
RADIUS Secret:
Network Access
Protection:
Accounting
Server:
Accounting
Secret:
Accounting
Mode:
Accounting Port:
Group Key
Update Interval:
Note: You can input the secondary RADIUS server and accounting
server settings if you have a backup RADIUS and accounting server.
