13D-Link DAP-2690 User Manual
Section 3 - Configuration
Using the Configuration Menu
To configure the DAP-2690, use a computer that is connected to the DAP-2690 with an Ethernet cable (see the
Network Layout
diagram
).
First, disable the “Access the Internet using a proxy server” function. To disable this function, go to Control Panel > Internet Options >
Connections > LAN Settings and uncheck the enable box.
Start your web browser program (I.E. Internet Explorer).
Type the IP address and http port of the DAP-2690 in the address field (http://192.168.0.50) and press Enter. Make sure that the IP
addresses of the DAP-2690 and your computer are in the same subnet.
After the connection is established, you will see the user identification window as shown.
Note: If you have changed the default IP address assigned to the DAP-2690, make sure to
enter the correct IP address.
Note: If you have changed the password, make sure to enter the correct password.
• Type “admin” in the User Name field.
• Leave the Password field blank.
• Click the Login button.
