19D-Link DAP-2690 User Manual
Section 3 - Configuration
WDS mode
In WDS mode, the DAP-2690 wirelessly connects multiple networks, without functioning as a wireless AP. After completing the desired
settings, click the Save button to let your changes take effect.
WDS is selected from the drop-down menu.
Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN). The
SSID’s factory default setting is dlink. The SSID can
be easily changed to connect to an existing wireless
network or to establish a new wireless network.
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Mode:
Network Name
(SSID):
SSID Visibility:
Wireless Band:
Select either 2.4 GHz or 5 GHz from the drop-down
menu.
Auto Channel
Selection:
All devices on the network must share the same
channel. To change the channel, use the drop-down
menu to make the desired selection.
Enabling this feature automatically selects the channel
that will provide the best wireless performance. This
feature is not supported in WDS mode.
Channel:
Channel Width:
Allows selection of the channel width you would like to
operate in. 20 MHz and Auto 20/40 MHz allow both
802.11n and non-802.11n wireless devices on your
network when the wireless mode is Mixed 802.11
b/g/n in 2.4G and Mixed 802.11 a/n in 5G. 802.11n
wireless devices are allowed to transmit data using 40
MHz when the channel width is Auto 20/40 MHz.
