![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/d/90/d9037798-dd68-429c-a782-4575560d4cbf/d9037798-dd68-429c-a782-4575560d4cbf-bg1b8.png)
I
Maintenance Schedule
I
-
Diesel Engines
55,000
Miles
(88
000
km)
0
Change engine oil and filter (or every
3
months, whichever occurs
0
Lubricate
the
front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature
is
10"
F
(-12"
C),
or higher. When weather is cold,
let
the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of
the
listed lubrication service items at this mileage
interval
(or
every
12
months, whichever occurs first).
first).
An
Emission Control Service.
0
Check readfront axle fluid level and add fluid
as
needed. Check
constant velocity joints and axle seals for leaking.
**
ACTUAL MILEAGE
SERVICED BY:
57,500
Miles
(92
000
km)
0
Change engine
oil
and filter
(or
every
3
months, whichever occurs
first).
An
Emission
Control
Service.
0
Lubricate the front suspension, king pin bushings, steering linkage,
transmission
shift
linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is
10"
F
(-12"
C),
or
higher. When weather is cold, let
the
ball joints and king
pin bushings warm up before lubrication or
they
could be damaged.
Perform each of
the
listed lubrication service items at this mileage
interval (or every
12
months, whichever occurs first).
DATE SERVICED BY: ACTUAL MILEAGE
I
7-77