A SERVICE OF

logo

Open as PDF
next previous
Then,
without shutting off the engine, follow these steps:
1.
Flip the handle up and then pull out the dipstick and wipe
it
with
a
clean rag or paper towel.
2.
Push
it
back
in
all
the way, wait three seconds and
then
pull
it
back out
again.
3.
Check both sides
of
the dipstick, and read the lower level. The fluid
level must be
in
the
COLD
area for a cold check or
in
the HOT area or
cross-hatched area for a hot check.
4.
If
the fluid level is
in
the acceptable range, push the dipstick back
in
all
the way; then flip the handle down to lock the dipstick
in
place.
6-28