A SERVICE OF

logo

Open as PDF
next previous
Au
3.
Squeeze the tab
on
the side
of
the
lamp socket
while turning the
socket
to
the
left.
4.
Pull the socket
out
of
the
lamp
assembly.
5.
Push
in
gently
on
the bulb, turn
it
to
the
left and remove
it
from the
socket.
6.
Put the new bulb
in
the socket, gently press
in
on the bulb and turn
it
to
the right
until
it
is
tight.
7.
Put the socket back into the lamp assembly and turn
it
to
the
right
until
it
locks.
8.
Put
the
parkinghurn signal lamp assembly back
into
the vehicle and
tighten the screws.
Front Parkingflurn Signal Lamps with Composite
Headlamps
_rY
I.
Remove the
screws and take
out
the
parkinghrn
signal lamp
assembly.
2.
Squeeze the tab
on
the side
of
the
lamp socket
while turning
the
socket
to
the left.
6-49